Home

Products & Services

Engineering Plastics

Specialty & High Performance Materials

Literature

Contact Us

Company News

 
® - (Nylon 6/6 Extruded)
PROPERTY UNITS ASTM TEST NATURAL MoS2 FILLED
Density gm/cm3 D792 1.15 1.15
Tensile Strength at Yield 73ºF psi D638 11.800 11.800
Tensile Modulus of Elasticity 73ºF psi D638 450.000 450.000
Elongation 73oF % D638 20 - 60 20 - 60
Flexural Modulus of Elasticity 73ºF psi D790 365.500 365.500
Flexural Strength 73ºF psi D790 14.500 14.500
Shear Strength 73ºF psi D732 9.500 9.500
Coefficient of Friction 73ºF - - 0.35 - 0.45 0.35 - 0.45
IZOD Impact Strength 73ºF ft-lbs/inch D256 2.5 2.5
Hardness 73ºF - D785 R115 R115
Tensile Impact ft-lbs/inch D1822 90 - 170 90 - 170
Deformation Under Load % D621 1, 0 - 3, 0 1, 0 - 3, 0
Melting Point oF D789 491 491
Coefficient of Linear Thermal Expansion 1/K D696 4.5 x 10-5 4.5 x 10-5
Continuous Service Temperature in Air (Max) ºF - 248 248
Deflection Temperature 66 psi ºF D648 430 430
Deflection Temperature 264 psi ºF D648 200 - 450 200 - 450
Flammability - According to UL 94 (1) * UL 94 V - 2 V - 2
Flammability - According to ASTM (2) % D2863 26 26
Comparitive Tracking Index - D3638 CTI 600 CTI 600
Volume Resistivity Ohm/cm D257 1014 1014
Dielectric Constant (103 Hz) - D150 3.6 3.6
Dielectric Constant (10 x Hz) - D150 3.4 3.4
Dissipation Factor (Tan :- at 103 Hz) - D150 0.015 0.015
Dielectric Strength KV/mm D149 > 12 > 12
 

Sustamid 6/6 - Nylon 6/6 - is a tough, wear resistant formulation that performs well even at very low temperatures. It offers good damping capacities and high compressive strength.

 

Röchling Sustaplast LP
216 Philips Road   
Exton, PA 19341
Phone 484 875-9040       
Fax     484 875-9030		 Please contact us at 800-832-6787 or by e-mail at info@sustaplast.com for more information on our products, technical or application support.