Home

Products & Services

Engineering Plastics

Specialty & High Performance Materials

Literature

Contact Us

Company News

 
® - (Cast Nylon 6)
PROPERTY UNITS ASTM TEST NATURAL & BLUE OIL FILLED MoS2 FILLED
Density gm/cm3 D792 1.15 1.14 1.15
Tensile Strength at Yield 73ºF psi D638 12.100 10.500 12.500
Tensile Modulus of Elasticity 73ºF psi D638 480.000 430.000 515.000
Elongation 73ºF % D638 10 - 60 20 - 60 10 - 40
Flexural Modulus of Elasticity 73ºF psi D790 510.000 455.000 525.000
Flexural Strength 73oF psi D790 14.9000 12.790 14.800
Shear Strength 73ºF psi D732 - - -
Coefficient of Friction 73ºF - - 0.3 - 0.35 0.15 - 0.25 0.32 - 0.36
IZOD Impact Strength 73ºF ft-lbs/inch D256 0.8 - 2.0 0.8 - 2.0 0.8 - 2.0
Hardness 73ºF - D785 R116 R108 R118
Tensile Impact ft-lbs/inch D1822 - - -
Deformation Under Load % D621 0, 5 - 1 0, 5 - 1 0, 5 - 1
Melting Point ºF D789 426 426 428
Coefficient of Linear Thermal Expansion 1/K D696 5.0 x 10-5 5.0 x 10-5 5.0 x 10-5
Continuous Service Temperature in Air (Max) ºF - 212 221 226
Deflection Temperature 66 psi ºF D648 168 168 168
Deflection Temperature 264 psi ºF D648 300 300 300
Flammability - According to UL 94 (1) * UL 94 V-2 HB V-2
Flammability - According to ASTM (2) % D2863 26 - 25
Comparitive Tracking Index - D3638 CTI 600 - CTI 600
Volume Resistivity Ohm/cm D257 1015 1015 1015
Dielectric Constant (103 Hz) - D150 3.7 3.7 3.7
Dielectric Constant (10 x Hz) - D150 3.4 - 3.4
Dissipation Factor (Tan :- at 103 Hz) - D150 0.03 - 0.029
Dielectric Strength KV/mm D149 > 15 > 15 >15
 

The various forms of Sustamid 6G - Cast Nylon 6, Natural, Blue, Oil and MoS2 Filled - offer a wide range of performance factors; high strength and abrasion resistance, thermal and moisture resistance and specially engineered frictional properties.
 

Röchling Sustaplast LP
216 Philips Road   
Exton, PA 19341
Phone 484 875-9040       
Fax     484 875-9030		 Please contact us at 800-832-6787 or by e-mail at info@sustaplast.com for more information on our products, technical or application support.